Description
The RA-2 series dual-jet air curtains allow for the cooling, blowing, or cleaning of cylindrical surfaces without excessive noise or increased air consumption. The compressed air jet is amplified 50 times.
principle
The tiny amount of compressed air escaping from the air curtain is catapulted at high speed through a 0.5 mm opening along the device. This creates an "air blade" that moves very quickly, drawing all the surrounding air with it to the targeted point. Air curtains are ideal for performing large-scale product cooling tasks or for cleaning large quantities of dust, shavings, oil, water, etc. Only a small volume of compressed air is required. And because the required amount of compressed air is so small, the noise level is also lower. Compared to other, conventional systems, reductions of up to 50 dB(A) can be achieved.
Air curtains cover a large area with a very fine stream of air (also called an air sword or air blade). The double jet of air, released at high speed, is evenly distributed along the entire length of the air curtain. Air curtains are ideal for fast-acting blow-off and drying applications.
Air curtains with double airflow multiply the compressor air by a factor of 50.
Features:
• Uniform, fine air jet
• Low commissioning and operating costs
• Significantly reduced noise level
• Airflow output easily adjustable
• Easy switching on and off
• No maintenance, no moving parts
• No electricity, no risk of explosion
• No electromagnetic interference
• No vibrations
Technical specifications of the RA-2 300 DF
Blowing capacity at 6 bar = 52,500 l/min
Air consumption at 6 bar = 2,100 l/min
Maximum operating temperature: 150°C
Material: Aluminum / Weight: 575g
Double air curtain series RA-2 – L 177 mm
| type | Dual current |
|---|---|
| material | aluminum |
| length | 177 mm |
| Production output | 52,500 l/min at 6 bar |
More information here in Datasheet (PDF)
We can also offer you:
Compressed air guns, compressed air systems, transvector air jets, vortex tubes, compressed air nozzles, cooling systems, compressed air stations, compressed air coolers, cold air guns, air nozzles and other cooling technology for e.g. injection molding processes or other industrial applications.
